Step-by-Step Guide to Checking Tire Pressure

Maintain safety, improve fuel efficiency, and extend tire life

Keeping your truck's tires at the correct pressure is one of the simplest yet most important maintenance tasks you can perform. Whether you drive a light-duty delivery truck or a heavy-duty freight vehicle, proper tire pressure improves fuel economy, enhances safety, and extends the life of your tires.

Here’s a practical, step-by-step guide for checking tire pressure—essential for new truck owners, operators, and used truck importers.

Why Tire Pressure Matters

• ✅ Improves fuel efficiency: Under-inflated tires increase rolling resistance.

• ✅ Enhances safety: Correct pressure ensures better braking and handling.

• ✅ Extends tire life: Prevents uneven wear and premature tire failure.

• ✅ Prevents blowouts: Especially important in hot or rough driving conditions.

For trucks used in international markets like Africa, Southeast Asia, or the Caribbean, tire maintenance becomes even more critical due to varying road conditions and climate extremes.

Tools You’ll Need

• A tire pressure gauge (digital or analog)

• Your truck’s recommended PSI chart (usually found on the door frame or owner’s manual)

• An air compressor or access to a filling station

Step-by-Step Instructions

Step 1: Park the Truck and Let Tires Cool

• Park on level ground.

• Wait at least 30 minutes after driving to get an accurate reading.

📌 Tire pressure increases when the tires are warm. Cold measurements are more accurate.

Step 2: Locate the Manufacturer’s PSI Recommendations

• Look at the driver-side door frame label or your truck’s manual.

• Note that front and rear tires may have different PSI requirements.

Step 3: Remove the Valve Cap

• Unscrew the small cap on the tire’s valve stem.

• Keep it in a safe place—you’ll need to replace it after the check.

Step 4: Check the Pressure

• Press the tire gauge onto the valve stem.

• Hold it firmly until you hear a brief hiss of air.

• Read the pressure displayed on the gauge.

🧰 Digital gauges give quicker and often more accurate readings.

Step 5: Compare and Adjust

• If the pressure is too low, add air using a compressor.

• If the pressure is too high, release air by pressing the valve with a tool or key.

• Repeat the check until the pressure matches the recommended PSI.

Step 6: Replace the Valve Cap

• Once the tire pressure is set correctly, screw the valve cap back on.

When to Check Tire Pressure

• Every two weeks or at least once a month

• Before long trips or heavy loads

• When temperatures change drastically

• After driving on rough roads

For export buyers, it’s also recommended to check and adjust tire pressure upon receiving the vehicle, as shipping conditions may affect pressure levels.

Bonus Tip: Don’t Forget the Spare Tire

Many truck owners forget to check the spare, only to find it flat in an emergency. Include it in your routine inspections.

Final Thoughts

Proper tire pressure keeps your truck safer, more efficient, and ready for any job. This simple routine check is especially important for users in challenging terrains, high-temperature environments, or long-distance routes.

At EVERY Co Ltd, we inspect and adjust tire pressure before exporting all used Japanese trucks to ensure they arrive in top condition—whether they’re heading to Kenya, Trinidad & Tobago, or Bangladesh.

Searching for a well-maintained Japanese truck?
Visit EVERYCAR.jp to explore our inventory of Toyota, Isuzu, Mitsubishi, and Nissan trucks—inspected, tested, and ready for export.

If you are looking for Japanese Used truck, please check our list.
The list of Used Japanese used truck for sale(*Click to open).

We do our best work for all customer's partnership.
It's for SDGs goal number 17 "PARTNERSHIP FOR THE GOALS".
Let's work together!