5. Cranes & Aerial Work Equipment

: 5. Cranes & Aerial Work Equipment Japanese Used Machinery & Heavy Equipment Guide

Understanding Crane Load Charts Before Buying Used Equipment

2026/9/7

A crane load chart answers a more useful question than the maximum tonnage printed in a brochure: “Can this exact crane lift my load at the radius, boom length and setup my project requires?” A 30-ton crane does not provide 30 tonnes of capacity throughout its working range. Capacity can fall significantly as radius increases, boom length changes or outriggers are not fully extended. Before buying a used crane from Japan, identify the exact model and obtain the correct manufacturer load chart. Then match your load weight, rigging, working radius, boom or jib configuration, outrigger position and operating area to ...

: 5. Cranes & Aerial Work Equipment Japanese Used Machinery & Heavy Equipment Guide

How to Check a Used Crane Before Purchase

2026/9/7

A used crane should never be judged from appearance, operating hours or maximum lifting capacity alone. Before purchase, confirm the exact model and serial number first. Then inspect the load-bearing structure, boom, wire ropes, winches, hook blocks, outriggers, hydraulics, slewing system, safety devices and carrier or crawler components. Finally, compare the physical condition with operating hours, mileage, maintenance information and previous use. This inspection does not replace a formal crane examination required by the destination country. However, it helps an overseas buyer identify obvious risks before committing to a machine in Japan. The most useful approach is to follow a ...

: 5. Cranes & Aerial Work Equipment Japanese Used Machinery & Heavy Equipment Guide

Boom Lift vs Scissor Lift: Which Aerial Platform?

2026/9/7

A boom lift is usually the better choice when workers must reach over walls, machinery, roofs or other obstacles. A scissor lift is often more practical when the work is mainly above the machine and a larger platform is needed for workers, tools or materials. Neither type is automatically better. Before buying a used aerial platform from Japan, compare the required floor height, horizontal outreach, platform capacity, access width, ground condition and power source. Then inspect the individual machine, including its boom or scissor structure, hydraulics, platform, controls, safety systems, tires, batteries or engine and maintenance information. This guide helps ...

: 5. Cranes & Aerial Work Equipment Japanese Used Machinery & Heavy Equipment Guide

Used Aerial Work Platforms from Japan: Buyer Guide

2026/9/7

A used aerial work platform from Japan can be useful for building maintenance, electrical work, factory projects, construction, signage and other jobs performed above ground. However, buyers should not choose a machine from maximum platform height alone. A scissor lift, self-propelled boom platform and truck-mounted aerial platform can all reach workers to height, but they suit very different jobs. First decide whether you need vertical access, horizontal outreach or road mobility. Then confirm platform capacity, working height, site width, ground condition and power source. After selecting the right category, inspect the platform, boom or scissor mechanism, hydraulics, controls, safety devices, ...

: 5. Cranes & Aerial Work Equipment Japanese Used Machinery & Heavy Equipment Guide

Japanese Mini Crawler Cranes for Compact Sites

2026/9/7

A Japanese mini crawler crane can be a practical choice when a normal rough terrain crane or truck crane cannot reach the lifting point. Compact tracked machines can enter narrow construction sites, factories, courtyards, rooftops and other restricted areas. Some models are narrow enough to pass through very limited access routes before deploying outriggers for lifting. The correct machine, however, is not simply the smallest crane available. Buyers should first measure access width, required load, working radius, lifting height and available outrigger space. Power source also matters for indoor work. After choosing the correct class, inspect the tracks, outriggers, boom, ...

: 5. Cranes & Aerial Work Equipment Japanese Used Machinery & Heavy Equipment Guide

Japanese Used Crawler Cranes: Overseas Buyer Guide

2026/9/7

A Japanese used crawler crane can be a strong choice for heavy construction, bridge work, plant projects, foundation work and large lifting operations where long boom reach, high lifting capacity and tracked mobility are required. However, a crawler crane is very different from a rough terrain crane. It usually needs more assembly, more transport planning and more space at the destination. Before buying, define the load weight, working radius, required boom or jib configuration, ground conditions and transport limits. Then compare the exact crawler crane model and load chart. Used buyers should also inspect the boom sections, wire ropes, winches, ...

: 5. Cranes & Aerial Work Equipment Japanese Used Machinery & Heavy Equipment Guide

How to Choose the Right Crane Capacity for Your Project

2026/9/7

Choosing crane capacity starts with the lift, not with a tonnage label. A 25-ton, 50-ton or 70-ton crane cannot lift its maximum rated load at every boom length or working radius. For a buyer, the correct capacity is the smallest crane class that can perform the required lift within the manufacturer's rated load chart while fitting the jobsite and setup conditions. Before selecting a used crane from Japan, confirm the actual load weight, working radius, hook height, boom requirement, available outrigger space and ground conditions. Then compare suitable crane models using their exact load charts. This guide is for contractors, ...